This ladder rack is the perfect solution to carrying two bikes on your RV without a heavy hitch rack or hard-to-reach roof rack. It won’t block access to your door or any exterior hatches, it doesn’t require any swing-away add ons, is lightweight and takes up far less space than other rack options. The bikes hang by the handlebars just like they do with any other Lolo rack.

The rack simply bolts to the ladder (the heavier duty, the better) using carrier bolts and sandwich plates, and takes about 20 minutes to install--no drilling required.

It’s sturdy enough to hold almost any type of bike under 50 pounds, including mountain bikes, lightweight e-bikes, road bikes, bikes with fenders, any size of kids bikes and fat bikes. However, dual crown forks require a DH-specific hook, which is available on Lolo’s website.

The rack retails for $355 before tax and shipping; asking $300.

Location

Lolo Rear-Mounted Ladder Rack (Brand New!)

No Drilling Needed. Dramatically Improved Handling And Stabilized Ride. Hidden When Not In Use. The Problems With Correct Fit For Each Particular Application Have Been Eliminated. Material: Steel. Unique In Its Design And Is Patented.

Torklift T2312 Front Frame Mounted Truck Camper Tie Downs

HappiJac 182910 FT-UT9 Frame Mount Camper Tiedown System Truck Camper

Truck Camper Tie Downs Used

Part # S9013

These heavy-duty turnbuckles make it easy to secure your camper to your truck bed. Stainless steel construction is durable and rustproof.

Features:

Turnbuckles secure your camper to the tie-downs (sold separately) mounted on your truck
Front turnbuckles are spring loaded to help reduce stress on tie-down points
Spring-tension indicators on both driver's and passenger's sides for simple setup
Rear turnbuckles are cushioned with rubber instead of being spring loaded
Ensures proper amount of tension for bumper-mounted tie-downs while still minimizing stress on tie-down points
Attachment hooks swivel for simple positioning
Sturdy, rustproof stainless steel construction

Kit Includes:

Two front spring-loaded turnbuckles 19” – 23.5” reach
Two rear cushioned turnbuckles 26.5” – 33” reach

Located in Sisters

Torklift Springloaded and Cushioned Turnbuckles

C2220 Front Tie-Downs for 2011-2016 Chevy Silverado/GMC Sierra 2500 & 3500 w/6.5' Bed
C3212 Rear Tie-Downs for 2011-2014 Chevy Silverado/GMC Sierra

All hardware is included. Fast, no-drill installation. 

Used for a few months before deciding I wanted to move camper back onto my older truck. Some of the powder coating is flaking off but no compromise to the structural integrity. 

Located in Sisters. 

I am also selling Torklift Springloaded Turnbuckles. See my other listing.

Lauren Brownlee

Torklift Truck Camper Tie Downs (2011-2014 Chevy Silverado/GMC Sierra 6.5ft bed, Frame Mount)

For all you Kimbo Camper owners! Convert your Rieco-Titan camper jacks to quick release, allowing you to install and remove jacks in seconds. Simply bolt the brackets to your existing jack and jack bracket. 

This configuration is for Kimbo owners without jack extensions (typically on Toyota Tacoma's, Ford Rangers, etc)

Easy install: No drilling required

Premium materials: Laser cut from 304 stainless steel, stainless steel hardware 

Kit includes brackets and hardware to convert 4 individual Rieco-Titan jacks. You will re-use your exitsing hardware to mount the hook plate to the jack

Made in Bellingham, WA

Jordan Trickett

Kimbo Camper Quick Release Jack Bracket System - No Extensions

For all you Kimbo Camper owners! Convert your Rieco-Titan camper jacks to quick release, allowing you to install and remove jacks in seconds. Simply bolt the brackets to your existing jack and jack bracket.

This configuration is for Kimbo owners with jack extensions (typically on full-size trucks)

Easy install: No drilling required

Premium materials: Laser cut from 304 stainless steel, stainless steel hardware

Kit includes brackets and hardware to convert 4 individual Rieco-Titan jacks. You will re-use your exitsing hardware to mount the hook plate to the jack

Made in Bellingham, WA

Kimbo Camper Quick Release Jack Bracket System - Extension Kit

For those that need to add a little width to their Rieco-Titan camper jacks we now have Jack Extension Plates in stock! Perfect for your Four Wheel Camper, Capri Camper, Travel Lite, etc. 

Made from 1/4" 304 Stainless Steel in Bellingham, WA

Compatible with Rieco-Titan jacks/jack plates with 5.5" hole spacing

Adds 3.75" of width to each jack and about 5” when paired with quick release brackets.

Sold in sets of 2 (most users just need for front jacks)

Stainless hardware included!

Jack Extension Brackets for Rieco-Titan Jacks

Everything you need to add about 1.5” of lift to a 2wd, 5 lug, 89-95 (pre-Tacoma) Toyota pickup

Includes:
-upper ball joint spacer and extended bolts
-extended shocks front and rear
-two “add-a-leaf” leaf springs

Price: a 6 pack for local pickup on the central coast of CA, a 12 pack plus the cost of shipping if you wanna ship it. 

Thanks!


Lift kit for 5 lug Toyota Pickup

I have two used large fast gun torklift camper locks.. I was given a set of four but only the smaller ones fit on my Tacoma so that is why I am selling the large ones. 

Fast Guns Torklift Camper Locks - Large

Convert your Rieco-Titan camper jacks with 5.5" hole spacing to quick release, allowing you to install and remove jacks in seconds. Simply bolt the brackets to your camper and jack.

Easy install: No drilling required

Compatibility: ratchet straps

Premium materials: Laser cut from 304 stainless steel, stainless steel hardware

Kit includes brackets and hardware to convert 4 individual Rieco-Titan jacks. You will re-use your exitsing hardware to mount the hook plate to the jack

Made in Bellingham, WA

Rieco-Titan Quick Release Jack Bracket System - No Tie-Down Holes

Convert your Rieco-Titan camper jacks with 5.5" hole spacing to quick release, allowing you to install and remove jacks in seconds. Simply bolt the brackets to your camper and jack.

Easy install: No drilling required

Compatibility: Standard turnbuckles or ratchet straps

Premium materials: Laser cut from 304 stainless steel, stainless steel hardware

Kit includes brackets and hardware to convert 4 individual Rieco-Titan jacks. You will re-use your exitsing hardware to mount the hook plate to the jack

Made in Bellingham, WA

Chainline Design LLC

Rieco-Titan Quick Release Jack Bracket System - With Turnbuckle Loop

Bed mounts used for our cab over camper, used on our 06 Tundra. Have recently upgraded to a frame mount system and no longer need these taking up space. These worked great, buyer will need to get mounting hardware/turnbuckes to attach to your camper.
Purchased in 2021, like new condition. 
Similar to product listed here: https://www.etrailer.com/Camper-Tie-Downs/Brophy/HSSF.html

 Brophy No-Drill Bed Mounts

Purchased 1 year ago. Fits the Goldilocks camper rig- first gen Tundra. Used with a little road sign, however camper was always stored in a covered shop. Prefer pickup/meet here near Hood River Oregon, but would be willing to ship

Cody Booth

TorkLift Tie Downs

4 Wheel Camper Tacoma bed bars. Supports a slide in camper in the Tacoma composite bed. The kit uses existing bed bolts, and comes with spacers for the mounts and the shackles to attach turnbuckles to. 

4 Wheel Camper Tacoma Bed support bars 

Want #Rigalerts delivered right to your inbox? Sign up to get rig listings delivered right to your email!

Looking for something else?

Get it in front of the highest quality Small Truck Camper buyers anywhere online! 

Selling Your Rig?

Small Truck Campers

Button text for listings originating from Craigslist.

cta_craigslist

Button text for listings originating from Facebook Marketplace.

cta_facebook

Button text for listings originating from eBay.

cta_ebay

Button text for listings within directory categories.

directory_cta

Button text for listings within lead categories.

lead_cta

Button text for listings within a category (when not adding to a cart).

default_category_cta

Button text to create a new listing within the category.

add_listing_btn

Button text to login from the auction page.

auction_login_btn

listing_title

listing_description

Button text for listings originating from Google.

cta_google

Button text for listings originating from Yelp.

cta_yelp

Button text for listings originating from Generic URL.

cta_other

Button text for first-party listings (source: Loma) within directory categories.

directory_first_party_cta

Button text for third-party/imported listings within directory categories.

directory_third_party_cta

Placeholder for the description field when creating/editing a listing. If empty, defaults to 'Enter your {listing_description} here'.